When To Change The Thread Lifters; How To Replace The Thread Lifters; Cleaning And Care - Miele HS15 Operating Instructions Manual

en
Your vacuum cleaner is fitted as stand‐
ard with a type c AirClean Plus exhaust
filter.
You can however use one of the follow‐
ing exhaust filters:
a AirClean
b Active AirClean 50
c AirClean Plus
d HEPA AirClean 50
When using the AirClean filter please
note:
An AirClean exhaust filter is supplied
with every packet of Miele dustbags. If
you wish to use this filter it is essential
that you use a filter grille (see "Optional
accessories").

When to change the thread lifters

The thread lifters on the suction inlet to
the floorhead can be replaced. Check
them from time to time and replace
them if the pile has worn down.

How to replace the thread lifters

(dia. 32)
 Use a suitable screwdriver to remove
the thread lifters from the slots.
 Fit new thread lifters.
Replacement parts are available from
your Miele Dealer or from Miele (see
end of booklet for contact details).

Cleaning and care


Always disconnect the vacuum
cleaner from the electrical supply be‐
fore cleaning it. Switch off at the wall
socket and unplug it.
42
Vacuum cleaner and accessories
The vacuum cleaner and all plastic ac‐
cessories can be cleaned with a propri‐
etary cleaner suitable for plastic.

contains electrical wires. Do not im‐
(SF-AA 50)
merse the hose in water for cleaning.
(SF-AP 50)
(SF-HA 50)

agents, glass cleaning agents, all-
purpose cleaners or oil-based condi‐
tioning agents.
Dust compartment
The dust compartment can, if necessa‐
ry, be cleaned using a dry duster, brush
or, if available, a second vacuum clean‐
er to vacuum the dust out.

get wet. If moisture gets into the ap‐
pliance, there is a risk of electric
shock.
The hose (depending on model)
Do not use abrasive cleaning
Do not let the vacuum cleaner