Advertisement
Tab
6
• Fit the tabs on the seat back into the openings in each side of
the seat bottom.
7
• Insert a #10 x 1,9 cm washer head screw into the hole in
each side of the seat back. Tighten both screws.
Assembly
Seat Back
Tab
#10 x 1,9 cm
Washer Head Screws
5
8
• Fit the frame covers into each frame tube.
9
• To secure the frame covers, insert a #8-16 x 1,9 cm screw into
the hole in each frame tube and tighten.
Frame Covers
BACK VIEW
#8-16 x 1,9 cm Screws
Advertisement
