Table of Contents
Advertisement
4.5.4
Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Q-Fan Controller
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU FAN Speed
CHA_FAN1 Speed
CHA_FAN2 Speed
SPS_FAN Speed
CPU Fan Speed warning
F1:Help
↑↓ : Select Item
ESC: Exit
→←: Select Menu
Q-Fan Controller [Disabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. These items are not user-configurable.
CPU Fan Speed
CHA_FAN1/2 Speed
SPS_FAN Speed
The onboard hardware monitor automatically detects and displays the CPU
and Chassis fan speeds in rotations per minute (RPM). If any of the fans is not
connected to the motherboard, the field shows 0. These items are not user-
configurable.
CPU Fan Speed warning [ 800 RPM]
Allows you to disable or set the CPU fan warning speed.
Configuration options: [Disabled] [800 RPM] [1200 RPM] [1600 RPM]
ASUS M2N2 WS Professional
Phoenix-Award BIOS CMOS Setup Utility
Power
Hardware Monitor
[Disabled]
1.47V
3.15V
5.05V
11.58V
3068 RPM
[ 800 RPM]
-/+: Change Value
Enter: Select SubMenu
Item Specific Help
Press
disable.
48ºC
41ºC
0 RPM
0 RPM
0 RPM
F10: Save and Exit
Select Menu
[Enter] to
enable or
F5: Setup Defaults
-
Advertisement
Table of Contents
