Table of Contents
Advertisement
4.
NVIDIA
nForce
®
SATA1 [red], SATA2 [red], SATA3 [red], SATA4 [red], SATA5 [red], SATA6
[red])
These connectors are for the Serial ATA signal cables for Serial ATA 3.0
Gb/s hard disk and optical disk drives. The Serial ATA 3.0 Gb/s is backward
compatible with Serial ATA 1.5 Gb/s specification.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID
1, RAID 0+1, RAID 5, or JBOD configuration through the onboard NVIDIA
MediaShield™ controller.
The RAID function of these connectors is set to [Disabled] by default. If you
intend to create a Serial ATA RAID set using these connectors, enable the RAID
Enabled item in the SATA Configuration sub-menu in the BIOS. See section
"4.4.7 Onboard Device Configuration" for details.
M2N32 WS PRO
®
M2N32 WS PRO SATA connectors
ASUS M2N32 WS Professional
590 SLI Southbridge Serial ATA connectors (7-pin
®
SATA5
SATA3
SATA1
SATA6
SATA4
SATA2
®
2-
Advertisement
Table of Contents
