Table of Contents
Advertisement
Vcore Offset Voltage [+ 50mV]
Allows you to set the Vcore offset voltage.
Configuration options: [+ 50mV] [+100mV] [+150mV] [+200mV]
P_+1.2V HT Voltage [+1.250V]
Allows you to set the P_+1.2V HT voltage.
Configuration options: [+1.250V] [+1.275V] [+1.300V]...[+1.425V]
P_+1.3V HT MCP Voltage [Auto]
Allows you to set the P_+1.3V HT MCP voltage.
Configuration options: [Auto] [+1.300V] [+1.325V] [+1.350V]...[+1.500V]
P_+1.5VSB Voltage [+1.500V]
Allows you to set the P_+1.5VSB voltage.
Configuration options: [+1.500V] [+1.600V] [+1.700V]
4.4.2
AI NET2
Advanced
POST Check LAN Cable
POST Check LAN2 Cable
Pair
LAN1(1-2)
LAN1(3-4)
LAN1(5-6)
LAN1(7-8)
LAN2(1-2)
LAN2(3-4)
LAN2(5-6)
LAN2(7-8)
F1:Help
ESC: Exit
POST Check LAN Cable [Disabled]
POST Check LAN2 Cable [Disabled]
Enables or disables checking of the LAN/LAN2 cable during the Power-On
Self-Test (POST). Configuration options: [Disabled] [Enabled]
-22
Phoenix-Award BIOS CMOS Setup Utility
AI NET2
Status
Open
Open
Open
Open
Open
Open
Open
Open
↑↓ : Select Item
→←: Select Menu
[Disabled]
[Disabled]
Length
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Enable or Disable LAN
cable check during POST.
F5: Setup Defaults
F10: Save and Exit
Chapter : BIOS setup
Advertisement
Table of Contents
