Download Print this page

Advertisement

Quick Links

Date:
December 12, 2005
Bulletin No:
Affected Models/VIN Range:
All 2006 Bearcat Wide Track and Wide Track Turbo Models
Condition:
It has come to our attention that during the assembly of some of the affected snowmobiles, Loctite,
which helps secure the driveshaft retainer to the driveshaft, may have been applied improperly or may not
have been applied at all. If either of these conditions exist, the driveshaft retainer may loosen resulting in
the possibility of damage to the chain case components.
Solution:
Remove the driveshaft retainer and properly apply blue Loctite #243 to the driveshaft threads; then
tighten the driveshaft retainer to 9.0 kg-m (65 ft-lb). See specifi c instructions included later in this bulletin.
I
NOTE: Although some snowmobiles may have had Loctite properly applied, it is necessary to remove the
driveshaft retainer from all affected snowmobiles and reapply Loctite. Even if Loctite may have been properly
applied, it will still be necessary to reapply Loctite since the effectiveness of the existing Loctite will have
been lessened by the removal of the retainer. See instructions included with this bulletin for the removal of the
driveshaft retainer and the proper application of Loctite.
Parts:
Not Applicable (None Needed)
Warranty:
A labor allowance of 0.7 hr will be paid per affected snowmobile.
Claim: Enter BS200606 in the Complaint section.
I
NOTE: Please remember that when submitting a claim, make sure to always enter the current mileage of each
affected snowmobile. In order for Arctic Cat to accurately assess warranty claims, an accurate recording of
mileage on snowmobiles with warranty claims is important.
To ensure that the necessary service work is completed in a timely manner and that this issue can be resolved,
Arctic Cat is requesting that all service work be completed prior to December 12, 2006. All warranty claims
directly related to this issue will not be honored after December 12, 2006, without prior approval.
Printed in the U.S.A.
Service Bulletin
2006-1-06
®™ Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701
Product Line:
Subject:
! ATTENTION
Snowmobile
Loctite Application (Driveshaft)
1205

Advertisement

loading

Summary of Contents for Arctic Cat Bearcat Wide Track 2006 Series

  • Page 1 To ensure that the necessary service work is completed in a timely manner and that this issue can be resolved, Arctic Cat is requesting that all service work be completed prior to December 12, 2006. All warranty claims directly related to this issue will not be honored after December 12, 2006, without prior approval.
  • Page 2 19. Install the chain case cover and related components using existing hardware. 20. Place the snowmobile in an upright position; then remove the clamping tool from the breather hose. Printed in the U.S.A. ®™ Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 1205...

This manual is also suitable for:

Wide track turbo 2006 series