Fisher & Paykel Aerotech OB30SD Installation Instructions Manual page 7

M
L K
SIDE
G
5 CABINETRY DIMENSIONS - DOUBLE OVENS
CABINETRY DIMENSIONS
Minimum inside width of cavity
I
Overall width of cabinetry
J
Minimum inside height of cavity
K
Overall height of cabinetry
L
Minimum inside depth of cavity
M
Proud install
Flush install
J
I
Electrical supply
TOP
OB30D MODELS
INCHES (MM)
28 1/2" (724)
30 1/8" (764)
48 3/16" (1224)
48 11/16" (1236)
22 5/8" (575)
24 1/8" (613)
5/8 - 13/16"
(16-20 mm)
1-1/2"
(39 mm)
min.
1/16"
(2 mm)
PROUD INSTALL
5/8 - 13/16"
(16-20 mm)
1-1/2"
(39 mm)
min.
1/16"
(2 mm)
FLUSH INSTALL
IMPORTANT!
FLUSH INSTALLATION
The depth of the control panel (G) is larger
than conventional ovens. Ensure you have
created a
1 1/2" (39 mm) recess in cabinetry.
If flush installing, you need to replace the
lower trim with the supplied long trim at
the base of the oven. Refer to Step 11 for
instructions.
IMPORTANT!
Make sure the cavity is
completely sealed with no gaps.
This is to ensure the oven
cooling system functions
correctly.
6