Pc Cards - Panasonic CF-37 Series Reference Manual

PC Cards

Label-side up
Lever
Your computer has one PC Card slot. This slot conforms to the PC Card Standard;
therefore, communications and SCSI devices may be utilized. The slot allows you to
use one Type I or Type II card.
CAUTION
Check the PC Cards' specifications. Be sure the total operating current does
not exceed the specified limit. Damage may result otherwise.
Allowable Current : 3.3 V: 400 mA, 5 V: 400 mA
SRAM, FLASH ROM (except for an ATA interface), ZV and CardBus cards are
not supported.
Installing/Removing the PC Card
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
2
Installing a PC Card
Simply slide the PC Card in until it snaps into place. Please refer to
the manual for each card on how to install the card (insertion is typi-
cally label-side up).
CAUTION
When inserting a card, do not force the card in if difficulty is encoun-
tered. You may damage the slot, making it impossible to remove the
card.
Removing a PC Card
CAUTION
Do not remove a PC Card while your computer is in the suspend or
hibernation mode.
Pull the lever out.
Slide the lever and slide the PC Card out.
Put the lever into place.
( "Starting Up/Shutting Down")
29