For Windows Nt - Panasonic CF-37 Series Reference Manual

PC Cards
PC Card Utility Program
About Phoenix Card Executive
When using a Windows NT
Windows NT is installed. If [Card Executive 2.0 for NT] is displayed in the [Control
®
Panel], this indicates that the program is installed.
If Phoenix Card Executive
disk has been reinstalled, reinstall Phoenix Card Executive
1
Select [Start] - [Run].
2
Type "c:\util\drivers\pccard\setup.exe", press [OK], then follow the on-screen in-
structions.
NOTE
Please do not use the Control Panel Icon labeled "PC Card (PCMCIA)". This
Control Panel will no longer function.
Instead, use the Control Panel Icon labeled "Card Executive 2.0 for NT" when
checking on the status of the PC Cards in your system.
About Card Executive 2.0 for NT Diagnostics
The screen on the right will appear when
[Control Panel] - [Card Executive 2.0 for
NT] - [Settings] - [Run Diagnostics] is se-
lected and [Next] is clicked.
The diagnostics procedure may actually
require two to three minutes, even though
the screen lists a response limit of 30 sec-
onds. Reboot the computer if there is no
response after two to three minutes.

2.0 for Windows NT

TM
model, confirm that Phoenix Card Executive™ 2.0 for
®
TM 2.0 for Windows NT ® has been uninstalled, or the hard
®
TM 2.0 for Windows NT ® .
30