Using Your Projector; Turning Your Projector On; Turning Your Projector Off - Dell 1609WX User Manual

Using Your Projector

Turning Your Projector On

NOTE:
Turn on the projector before you turn on the source. The Power light
blinks blue until the Power button is pressed.
Remove the lens cap.
1
Connect the Power cable and appropriate signal cables. For information about
2
connecting the projector, see Connecting Your Projector on page 7.
Press the projector Power button (see Using the Control Panel on page 21 to
3
locate the Power button).
Turn on your source (computer, DVD player, etc.). The projector automatically
4
detects your source.
If you have multiple sources connected to the projector, press the Source
button on the remote control or control panel to select the desired source.
The Dell Logo will continue for 30 seconds while power on.
5
If the "Searching for signal..." message appears on the screen, ensure that the
appropriate cables are securely connected.

Turning Your Projector Off

NOTICE:
You must turn off the projector before you disconnect the power
cable from the projector.
Press the Power button.
1
Press the Power button again. The cooling fans continue to operate for 90 seconds.
2
To power off the projector quickly, press the Power button while the projectors
3
cooling fans are still running.
NOTE:
Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
Disconnect the Power cable from the electrical outlet and the projector.
4
http://www.pureglare.com.au
Using Your Projector
3
17