Technical Data; Tools - Asko WM70.C Service Manual

Service manual WM70.C

Technical data

Height:
Width:
Depth:
Weight:
Cylinder volume:
Max. load capacity
Spin speed:
Connection:
Heater output:
Water pressure/inlet valve:
Wash drum and liquid compartment:
Outer panels:
Installation:
Water connection:
Drainage:
Protection class:
Water consumption (tested normal
programme)
Water consumption (tested normal
programme)
Electricity consumption, Standby:
- Machine turned off
- Delayed start
- Programme ended

Tools

Torx: T25, T20, T10
Ring spanner: 11/16", 16 mm, 13 mm, 10 mm
Socket screwdriver 10 mm
Extended socket 24 mm + ratchet handle
Allen key 5 mm + small ratchet handle
Plastic hammer
Phillips screwdriver
Wire cutter
24
850 mm
595 mm
585 mm
73 kg
60 l
8 kg/6 kg
800-1600
1-phase 16 A, 3-phase 10 A
2000 W/3000 W
0.1–1 MPa, 1–10 kp/cm2, 10–100 N/cm2 8 l/min
Stainless steel
Powder-coated and hot-galvanised sheet steel or stainless steel
Stationary on four adjustable, rubber-clad feet
1.5 m PEX tubing, 3/4"–3/4" or 3/4"–1/2"
1.7 m polypropylene tubing
IP X4
59 litres, 3 rinses (5 kg/6 kg
<72 litres, 5 rinses (6 kg)
<69 litres, 5 rinses (5 kg)
1.02 kWh (6 kg)
0.95 kWh (5 kg)
<0.3 W
<6.0 W
<3.0 W