Asko WM70.C Service Manual page 18

Service manual WM70.C
Service menu content (cont.)
24 Show
temp
25 Change
temp
26 Programs
27 Spin time
28 Coin
29 Reset
Return
3 Special
Pr 20
Pr 21
Pr 22
Return
18
Temp Off Only applies to the disinfection programmes (Pr17-Pr19)
Temp On
Pr1-Pr19 This can be changed in steps of 1°C between -10°C to +10°C. You cannot set a total
temperature that exceeds +92°C.
Pr1-Pr19 Select "On" or "Off "
Programmes can be activated/deactivated. A deactivated programme is not shown on the
display.
A maximum of 10 programmes can be shown on the display in programme mode. If more than
10 programmes are activated, then only the first ten activated programmes are shown on the
display.
If all the programmes have been deactivated, the display only shows "Pr1".
If the machine is Swan-labelled, "Pr1" and "Pr2" are always activated/On.
0-300 sec • Extend or shorten the spin time: 0-300 sec.
• If "0 sec" is selected, the pre-programmed spin time is used.
• If a time in the interval "1 sec" to "300 sec" is selected, this time is added to the pre-
programmed spin time.
• This function only works for programmes Pr13 and Pr14.
Coin Off See the wiring diagram for the correct connection and functionality of a slot meter.
Coin On
Only production Used only in production
reset
Press the Key button (S5) to return to 2 Settings.
34 Pre wash 341 Number of
342 Water level
343 Time
344 Heat temp
Return
35 Main wash 351 Temperature
352 Water level
353 Reheat temp
354 Reheat time
355 Work time
Return
36 Rinses 1 Rinse/2 Rinse/...../7 Rinses
37 Extra spin On/off
38 Spin speed 400/600/800/1000/1200/1300/1400/1500/1600 RPM
39 Spin time 0-300 sec
Return Press the Key button to return to the previous menu level.
See above
See above
Press the Key button (S5) to return to 3 Special.
0/1/2/3
Normal water level/High water level
1/2/3/4/...../15
No heat/25°C/26°C/......./60°C
30°C/31°C/...../92°C
Normal water level/High water level
28°C/29°C/...../92°C
0min/1min/...../60°C
0min/1min/...../60min