Onboard Devices Configuration - Asus K8V SE User Manual

USB 1.1 Ports Configuration [USB 8 Ports]
Allows you to set the number of USB ports to activate.
Configuration options: [Disabled] [USB 2 Ports] [USB 4 Ports]
[USB 6 Ports] [USB 8 Ports]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 ports controller.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to
Auto allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [FullSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or
Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full Speed]

4.4.3 Onboard Devices Configuration

Onboard AC'97 Audio
OnChip SATA BOOTROM
OnBoard Promise Controller
Operating Mode
OnBoard LAN
OnBoard LAN Boot ROM
OnBoard 1394
Serial Port1 Address
Serial Port2 Address
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
OnBoard Game Port
OnBoard MIDI Port
OnBoard AC'97 Audio [Enabled]
[Auto] allows the BIOS to detect whether you are using any audio device.
If an audio device is detected, the onboard audio controller is enabled; if
no audio device is detected, the controller is disabled.
Configuration options: [Disabled] [Enabled]
OnChip SATA Boot ROM [Enabled]
Allows you to enable or disable the onchip Serial ATA boot ROM.
Configuration options: [Disabled] [Enabled]
ASUS K8V SE Deluxe motherboard
[Enabled]
[Enabled]
[Enabled]
[RAID]
[Enabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Disabled]
[Normal]
[IRQ7]
[Disabled]
[Disabled]
4-23