DRYER 9577/9588
Rollers
DLE9577/DLG9588
DISASSEMBLY/REPAIR
Replacing the rollers is relatively
simple.
1.
2.
3.
4.
5.
NOTE:
If the shaft is OK and you are replacing
only the roller, you can squeeze the
triangular retainer to remove and
replace the roller without having to
remove the shaft from the machine.
Be sure to install the small bushings.
These must be between the roller and
the retainer on both sides of the roller.
Page 48 of 58
Remove the top plate.
Remove the front cover.
Remove the tub front.
Remove the drum and belt (only
if you are replacing the back
rollers.)
Use an open-end wrench to
remove and replace the shaft.
TRAINING MANUAL