DRYER 9577/9588
Drum Front
Drum Assembly and Belt
DLE9577/DLG9588
DISASSEMBLY/REPAIR
1.
2.
3.
Page 44 of 58
Remove the top plate.
Remove the front cover.
Disconnect the drum lamp and
sensor harness.
1.
Remove the top plate.
2.
Remove the front cover.
3.
Remove the drum front.
4.
Push against the pulley to
relieve pressure on the belt and
take if off the motor shaft. You
can then lift the drum out of the
cabinet. When replacing the
drum, you can replace the belt
on the wheels after the dryer is
reassembled by reaching into
the cabinet either through the
front or through one of the vent
openings.
TRAINING MANUAL