Dodge Charger 2011 Owner's Manual page 302

300 UNDERSTANDING YOUR INSTRUMENT PANEL
calibrate the compass by pressing the ON soft-key and
completing one or more 360–degree turns (in an area free
from large metal or metallic objects) until the CAL
indicator displayed in the EVIC turns off. The compass
will now function normally.
NOTE: A good calibration requires a level surface and
an environment free from large metallic objects such as
buildings, bridges, underground cables, railroad tracks,
etc.
Audio
• Equalizer
Press the Equalizer soft-key to change this display. When
in this display you may adjust the Bass, Mid and Treble
settings. Adjust the settings with the + and – setting
soft-keys or by selecting any point on the scale in
between the + and – soft-keys followed by pressing the
arrow back soft-key.
NOTE: Bass/mid/treble allow the you to simply slide
your finger up/down to change the setting as well as
press directly on the desired setting.
• Balance / Fade
Press the Balance / Fade soft-key to change this display.
When in this display you may adjust the Balance and
Fade settings.
• Speed Adjusted Volume
Press the Speed Adjusted Volume soft-key to change this
display. Decreases volume relative to vehicle speed. To
change the Speed Adjusted Volume press the Off, 1, 2 or
3 soft-key followed by pressing the arrow back soft-key.
• Surround Sound
Press the Surround Sound soft-key to change this display.
Provides simulated surround sound mode. To make your
selection, press the Surround Sound soft-key, select ON
or OFF followed by pressing the arrow back soft-key.