To Disarm The System - Dodge Charger 2011 Owner's Manual

To Disarm The System

Vehicles Not Equipped With Keyless Enter-N-Go
Either press the UNLOCK button on the RKE transmitter
or insert a valid ignition key into the ignition switch and
turn the key to the ON/RUN position.
NOTE:
• The Vehicle Security Alarm remains armed during
trunk entry. Pressing the RKE transmitter or Passive
Entry TRUNK button will not disarm the Vehicle
Security Alarm. If someone enters the vehicle through
the trunk, and opens any door, the alarm will sound.
• When the Vehicle Security Alarm is armed, the interior
power door lock switches will not unlock the doors.
The Vehicle Security Alarm is designed to protect your
vehicle; however, you can create conditions where the
Vehicle Security Alarm will give you a false alarm. If one
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19
of the previously-described arming sequences has oc-
curred, the Vehicle Security Alarm will arm regardless of
whether you are in the vehicle or not. If you remain in the
vehicle and open a door, the alarm will sound. If this
occurs, disarm the Vehicle Security Alarm.
If the Vehicle Security Alarm is armed and the battery
becomes disconnected the Vehicle Security Alarm will
remain armed when the battery is reconnected. The
exterior lights will flash, the horn will sound, and the
ignition will not start the vehicle. If this occurs, disarm
the Vehicle Security Alarm.
Vehicles Equipped With Keyless Enter-N-Go
Either press the UNLOCK button on the RKE transmitter
or grasp the Passive Entry Unlock Door Handle (refer to
"Keyless Enter-N-Go" in "Things To Know Before Start-
ing Your Vehicle" for further information), press the
Keyless Enter-N-Go Start/Stop button (requires at least
one valid Key Fob in the vehicle), or insert a valid Key
2