Programming Homelink - Dodge Charger 2011 Owner's Manual

NOTE: HomeLink is disabled when the Vehicle Secu-
rity Alarm is active.
WARNING!
• Your motorized door or gate will open and close
while you are training the Universal Transceiver.
Do not train the transceiver if people, pets, or
other objects are in the path of the door or gate.
• Do not run your vehicle in the garage while
training the transceiver. Exhaust gas from your
vehicle contains Carbon Monoxide (CO) which is
odorless and colorless. Carbon Monoxide is poi-
sonous when inhaled and cause you and others to
be severely injured or killed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241
NOTE: Only use this transceiver with a garage door
opener that has a "stop and reverse" feature as required
by federal safety standards. This includes most garage
door opener models manufactured after 1982. Do not use
a garage door opener without these safety features. Call
toll-free 1–800–355–3515 or, on the Internet at
www.HomeLink.com for safety information or assis-
tance.

Programming HomeLink

Before You Begin
If you have not trained any of the HomeLink buttons,
erase all channels before you begin training.
To do this, press and hold the two outside buttons for up
to 20 seconds. The EVIC will display "CLEARING
CHANNELS." Release the buttons when the EVIC mes-
sage states "CHANNELS CLEARED."
3