Advertisement
6. Product maintenance and cleaning.
Ensure you check the filter is free from dust as this will affect the operation of your
heater. Clean filter frequently.
Notice
Please do not use harsh chemicals to clean the filter
To clean
Make sure the heater is turned off and has cooled.
Disconnect the power cord or turn off the isolation switch, to reduce the risk of an
electrical shock.
Use a soft dry cloth to remove any dust from the surface of the heater.
Do not use any abrasive or corrosive cleaning products that can damage the
surface.
If you are facing the heater, slide out the filter from the right rear.
Pull out the filter as the direction showed below
Filter bracket
Clean the filter with water and a gentle detergent under the temperature of 30℃.
Allow the filter to dry completely before sliding it back into the heater.
Please dispose the product responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased.
Glen Dimplex New Zealand Ltd
P O Box 58473,
Botany, Auckland
New Zealand
Ph: 09 274 8265
Email:
sales@glendimplex.co.nz
filter
5
Advertisement
