Advertisement
C, Select a location for mounting the heater. Secure the base of wall holder to the wall
by screw, and then fix the wall holder to the base using the knob. Please see image below.
D, Ensure the power button is at the top of the heater facing you, tilt the heater slightly and
hook to the top of the wall holder then allow the bottom to rest on the bracket, thus
securing your heater
Bottom of the bracket
E, To take the heater off the wall holder, tilt the unit from the bottom then unhook from the
top.
F, The wall bracket allows you to adjust the direction slightly, simply take the heater off the
wall holder, and loosen the knob, you can then slide the bracket along the slot in the
bracket to change to the direction preferred, then screw the knob firmly, placing the heater
back on the bracket.
5. Operation instruction
5.1 Connect the power cord with the correct power supply (220-240V~).
5.2 Heat selections are Off, Low 1300W and High 2000W
5.3 Turn the temperature knob to the preferred heat, the room temperature will increase
gradually
A. When the room reaches the selected temperature the heater will turn off. As the
temperature drops below the selected temperature the heater will start again.
4
Advertisement
