Brake Pedal - Subaru LEGACY Service Manual

BRAKE

16.Brake Pedal

A: REMOVAL
1. MT MODEL
• LHD model
1) Pull up parking brake lever and block tires.
2) Disconnect battery ground cable.
3) Remove steering column.
<Ref. to PS-28, REMOVAL, Tilt Steering Column.>
4) Disconnect connectors from stop light and clutch
switches.
5) Remove snap pins which secure lever to push
rod and operating rod.
6) Remove clevis pins which secure lever to push
rod and operating rod.
( A )
( D )
( C )
(A) Operating rod
(B) Push rod
(C) Snap pin
(D) Clevis pin
7) Remove PHV adjusting nut and lock nut.
( 3 )
(1) Adjusting nut
(2) Lock nut
(3) PHV
BRAKE PEDAL
( D )
( C )
( B )
BR-00174
( 1 )
( 2 )
BR-00131
8) Remove cable clamp, and disconnect PHV ca-
ble from PHV.
CAUTION:
Carefully protect boot and inner cable from
damage when disconnecting PHV cable.
( 1 )
(1) PHV cable
(2) Clamp
9) Remove nut which secures clutch master cylin-
der.
10) Remove bolts and nuts which secure brake and
clutch pedals, and remove pedal assembly.
BR-50
( 2 )
BR-00132
BR-00175