Honda ACCORD Owner's Manual page 302

Cooling System
7. When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
8. 6-cylinder models only
Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
7 lbf·ft (9.8 N·m , 1.0 kgf·m)
304
Maintenance
FILLER NECK
Fill up to here
4-cylinder models
9. Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
FILLER NECK
Fill up to here
6-cylinder models