Honda ACCORD Owner's Manual page 175

Audio System
For best results when using CD-R
discs, use only high quality discs
labeled for audio use. When
recording a CD-R, the recording
must be closed in order for the disc
to be used by CD players. CD-RW
discs will not work in this unit.
Loading CDs in the Changer
To load multiple CDs in one
operation:
1. Press and hold the LOAD button
until you hear a beep and see
''LOAd'' in the display, then
release the button.
2. On the upper side of the display,
the disc number for an empty
position will begin blinking and the
green CD load indicator will come
on.
3. Insert the disc into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
174
Comfort and Convenience Features
way. You will see ''BUSY'' in the
display. The CD load indicator
turns red and blinks as the CD is
loaded.
4. When the CD load indicator turns
green and ''LOAd'' appears in the
display, insert the next disc into
the CD slot.
5. Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
If you are not loading CDs into all six
positions, the system will begin
playing the last CD loaded.
If you stop loading CDs before all six
positions are filled, and you do not
press the LOAD button, the system
will wait for ten seconds, then stop
the load operation and begin playing
the last CD loaded.
To load a single CD:
Press and release the LOAD
1.
button.
2. The disc number for an empty
position starts to blink and the
green CD load indicator comes on.
When you see ''LOAd'' in the
display, insert the disc into the CD
slot. Insert it only about halfway;
the drive will pull it in the rest of
the way.
3. The system will load the CD, and
begin playing it.