Honda ACCORD Owner's Manual page 150

You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset bars.
TUNE Use the TUNE bar to tune
−
the radio to a desired frequency.
Press the side of the bar to tune
to a higher frequency, and the
side to tune to a lower
frequency. The frequency numbers
will start to change rapidly. Release
the bar when the display reaches the
desired frequency. To change the
frequency in small increments, press
and release the TUNE bar quickly.
SEEK − The SEEK function
searches the band for a station with
a strong signal. To activate it, press
the SEEK bar on either the
, then release it. Depending on
which side you press, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
SCAN − The SCAN function
samples all the stations with strong
signals on the selected band. To
or activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
Comfort and Convenience Features
Audio System
CONTINUED
149