Honda ACCORD Owner's Manual page 156

2003
Hide thumbs Also See for ACCORD:
Table of Contents

Advertisement

For best results when using CD-R
discs, use only high quality discs
labeled for audio use. When
recording a CD-R, the recording
must be closed in order for the disc
to be used by CD players. CD-RW
discs will not work in this unit.
When the system reaches the end of
the disc, it will return to the begin-
ning and play the disc again.
You can switch to the radio while a
CD is playing by pressing the AM/
FM button. Press the CD button to
return to playing the CD. The CD
will begin playing where it left off.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off.
Press the eject button to remove the
disc from the drive.
If you eject the disc, but do not
remove it from the slot, the system
will automatically reload the disc
after 15 seconds and put the CD
player in pause mode. To begin
playing the disc, press the CD button.
You can use the SEEK/SKIP bar
while a disc is playing to select
passages and change tracks.
To move rapidly within a track, press
and hold the SEEK/SKIP bar. Press
the
side to move forward. Press
the
side to move backward.
Release the bar when the system
reaches the point you want.
Each time you press and release the
side of the SEEK/SKIP bar,
the system skips forward to the
beginning of the next track. Press
and release the
side to skip
Audio System
backward to the beginning of the
current track. Press it again to skip
to the beginning of the previous
track.
SCAN
This feature, when
activated, samples all the tracks on
the selected disc in the order they
are recorded on the CD. To activate
the Scan feature, select the Scan
mode by pressing the SCAN button.
You will see SCAN in the display.
The system will then play the first
track for approximately ten seconds.
If you do nothing, the system will
then play the following tracks for ten
seconds each. When it plays a track
that you want to continue listening to,
press the SCAN button again.
Comfort and Convenience Features
CONTINUED
155

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents