Honda ACCORD Owner's Manual page 301

RUBBER HOSE DRAIN BOLT
6-cylinder models only
4.
Install a rubber hose on the drain
bolt at the rear of the engine
cylinder block. Loosen the drain
bolt.
Drain the coolant into an
appropriate container.
MOUNTING RESERVE TANK
BOLT
4-cylinder models
5. Remove the reserve tank
mounting bolt with a wrench.
RESERVE
TANK CAP
RESERVE
TANK CAP
HOLDERS 6-cylinder models
6. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant into an
appropriate container, then put the
tank back in its holder. Install the
mounting bolt securely.
Cooling System
MOUNTING RESERVE
BOLT TANK
HOLDERS
CONTINUED
303
Maintenance