MSI MS-6117 User Manual page 49

Boot up Num Lock
When this option is set to Off, AMI
key when the system is powered on. The end user can then use the arrow
keys on both the numeric keypad and the keyboard. The settings are On or
Off. The optimal default and Fail-Safe default settings are On.
Floppy Drive Swap
Set this option to Enabled to specify that floppy drives A: and B:
are swapped. The setting are Enabled and Disabled. The Optimal and Fail-
Safe default settings are Disabled.
Floppy Drive Seek
When this option is set to Enabled, AMI
command on floppy drive A: before booting the system. The settings are
Enabled and Disabled. The Optimal and Fail-Safe default settings are
Disabled.
PS/2 ® Mouse Support
When this option is set to Enabled, AMI
mouse. The settings are Enabled and Disabled. The Optimal and Fail-Safe
default settings are Enabled.
Primary Display
This option configures the primary display subsytem in the
computer. The settings are Mono(monochrome), 40CGA, 80CGA or VGA/
EGA. The optimal and Fail-Safe default settings are VGA/EGA.
Password Check
This option specifies the type of AMI
that is implemented. The Optimal and Fail-Safe default settings are Setup.
®
®
BIOS turns off the Num Lock
®
BIOS performs a Seek
®
BIOS supports a PS/2
®
BIOS password protection
3-7
®