Table of Contents
Advertisement
GENERAL INFORMATION
This section describes the functions
and features of the Bluetooth mobile
phone and voice control system.
The section covers the following
variations:
•
a mobile phone with a mobile
phone cradle without voice
control
•
a Bluetooth and voice control
system with a mobile phone
cradle
•
a Bluetooth and voice control
system without a mobile phone
cradle.
The Bluetooth mobile phone part of
the system provides interaction with
the audio or navigation system and
your mobile phone. It allows you to
use the audio or navigation system
to make and receive calls without
having to use your mobile phone.
The voice control part of the system
can be used to control:
•
mobile phone calls
•
audio system functions
•
vehicle climate control functions.
Telephone
Note: The mobile phone does not
switch off immediately after the
ignition key is turned off: the power
down delay is preset to 10 minutes.
The time period can be adjusted to
between 0 and 60 minutes. This,
depending on your mobile phone,
can be achieved by creating a
phonebook entry on your mobile
phone with the name Timer and the
required delay as it's number.
If the Bluetooth and voice control is
used for an extended period of time
when the vehicle is stationary, make
sure that the engine is running to
avoid draining the battery
TELEPHONE SETUP
Requirements for cradle
connection
Your phone must be fitted in a mobile
phone holder before it can be used
as a cradle phone with your
handsfree/voice control system. You
will be able to purchase the correct
holder for your phone from your
dealer.
Placing your phone in the
cradle
Note: Your phone must be fitted in
a mobile phone holder to allow you
to connect the phone to the cradle.
Connect your phone to the cradle.
1. Place the base of the phone in the
cradle connection.
Note: Make sure that the phone is
pushed fully rearwards in the cradle.
172
Advertisement
Table of Contents
