Table of Contents
Advertisement
E70958
•
Insert the hook of the handle into
the ring on the jack. Insert the
wheel brace into the other end of
the handle and rotate clockwise.
All vehicles
E70960
•
Jack up the vehicle until the tyre
is clear of the ground.
•
Unscrew and remove the wheel
nuts and take off the wheel.
Wheels and tyres
151
Fitting a wheel
WARNING
Make sure that there is no
lubrication (grease or oil) on the
threads or the interface between
wheel studs and nuts.
Note: The wheel nuts of alloy wheels
can also be used for the steel spare
wheel.
•
Align and fit the wheel onto the
wheel studs. Make sure that the
flat washers of the wheel nuts are
facing the wheel. Screw on the
wheel nuts and tighten.
•
Lower the vehicle and remove the
jack.
1
3
5
6
4
2
E70961
4
2
1
3
5
Advertisement
Table of Contents
