Table of Contents
Advertisement
Making a call
Dialling a number
You can access your phone address
book either with the phone docked
in the cradle or via Bluetooth. The
entries will appear in the audio unit
display.
1. Press the PHONE or the call
accept button.
2. Press the MENU button.
3. Keep pressing the MENU button
until PHONEBOOK appears.
4. Press the seek buttons to select
the desired phone number.
Note: Press and hold the seek
button to skip to the next letter in the
alphabet.
5. Press PHONE or the call accept
button to dial the selected phone
number.
If you have an audio unit with a
telephone keypad (buttons 0-9, * and
#), you can also direct dial by entering
the number on the radio display via
the keypad and pressing the call
accept button:
1. Press the call accept button.
2. Dial the number using the
telephone keypad on the audio
unit.
3. Press the call accept button.
Note: If you enter an incorrect digit
whilst entering a phone number,
press the seek down button to erase
the last digit. A long press will erase
the complete string of digits.
Telephone
Press and hold 0 to enter a + digit.
Ending a call
Calls can be ended by either:
•
pressing one of the following
buttons on the audio unit: PHONE,
CD, AM/FM, ON/OFF
•
pressing the MODE button on the
remote control
•
pressing the call reject button.
Note: If you have an audio unit with
a telephone keypad you canend a
call only with the call reject button.
Redialling a number
1. Press the PHONE or the call
accept button.
2. Press the MENU button.
3. Select the CALL OUT list or the
CALL IN list.
Note: If the active phone does not
provide a call out list, the last
outgoing call number/entry is
displayed.
4. Press the seek button on the
audio unit.
5. Press PHONE or the call accept
button to dial the desired phone
number.
Redialling the last dialled
number
Note: This applies to only audio units
with a telephone keypad
1. Press the call accept button.
2. Press the call accept button again
to display the last dialled number.
177
Advertisement
Table of Contents
