D-Link DES-3028 User Manual page 205

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
The user may also select the desired time interval to update the statistics, between 1s and 60s, where "s" stands for seconds. The
default value is one second. To clear the current statistics shown, click the Clear button in the top left hand corner.
The following fields can be viewed:
Parameter
Server
UDP Port
Timeouts
Requests
Challenges
Accepts
AccessRejects
RoundTripTime
AccessRetrans
PendingRequests
AccessResponses
Figure 11- 23. RADIUS Authentication window
Description
The identification number assigned to each RADIUS Authentication server that the client
shares a secret with.
The UDP port the client is using to send requests to this server.
The number of authentication timeouts to this server. After a timeout the client may retry to
the same server, send to a different server, or give up. A retry to the same server is counted
as a retransmit as well as a timeout. A send to a different server is counted as a Request as
well as a timeout.
The number of RADIUS Access-Request packets sent to this server. This does not include
retransmissions.
The number of RADIUS Access-Challenge packets (valid or invalid) received from this
server.
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
The time interval (in hundredths of a second) between the most recent Access-
Reply/Access-Challenge and the Access-Request that matched it from this RADIUS
authentication server.
The number of RADIUS Access-Request packets retransmitted to this RADIUS
authentication server.
The number of RADIUS Access-Request packets destined for this server that have not yet
timed out or received a response. This variable is incremented when an Access-Request is
sent and decremented due to receipt of an Access-Accept, Access-Reject or Access-
Challenge, a timeout or retransmission.
The number of malformed RADIUS Access-Response packets received from this server.
Malformed packets include packets with an invalid length. Bad authenticators or Signature
attributes or known types are not included as malformed access responses.
192