D-Link DES-3028 User Manual page 108

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
The window above contains the following information:
Parameter
Configuration Name
Revision Level
MSTI ID
VID List
Clicking the Add button will reveal the following window to configure:
The user may configure the following parameters to create a MSTI in the Switch.
Parameter
MSTI ID
Type
Figure 7- 18. MST Configuration Identification window
Description
A previously configured name set on the Switch to uniquely identify the MSTI (Multiple
Spanning Tree Instance). If a configuration name is not set, this field will show the MAC
address to the device running MSTP. This field can be set in the STP Bridge Global Set-
tings window.
This value, along with the Configuration Name will identify the MSTP region configured on
the Switch. The user may choose a value between 0 and 65535 with a default setting of 0.
This field shows the MSTI IDs currently set on the Switch. This field will always have the
CIST MSTI, which may be configured but not deleted. Clicking the hyperlinked name will
open a new window for configuring parameters associated with that particular MSTI.
This field displays the VLAN IDs associated with the specific MSTI.
Figure 7- 19. Instance ID Settings window – Add
Description
Enter a number between 1 and 4 to set a new MSTI on the Switch.
Create is selected to create a new MSTI. No other choices are available for this field when
creating a new MSTI.
95