D-Link DES-3028 User Manual page 141

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Click the Add Profile button to continue on to the CPU Interface Filtering Rule Table window. A new and unique window, for
Ethernet, IP and Packet Content will open as shown in the examples below.
To change a rule for a previously created CPU Access Profile Rule:
The CPU Interface Filtering Rule Configuration window allows the user to create a rule for a previously created CPU Access
Profile.
Figure 9- 22. CPU Interface Filtering Rule Configuration window – Ethernet
To set the CPU Access Rule for Ethernet, adjust the following parameters and click Apply.
Parameters Description
Profile ID This is the identifier number for this profile set.
Mode Select Permit to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are not forwarded by the
Switch and will be filtered.
Access ID Type in a unique identifier number for this access and priority. This value can be set from 1 to 5.
Figure 9- 21. CPU Interface Filtering Rule Table window
128