D-Link DES-3028 User Manual page 182

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
To view the following table, click Security > Access Authentication Control > Enable Method Lists:
To delete an Enable Method List defined by the user, click the
be deleted. To modify an Enable Method List, click on its hyperlinked Method List Name. To configure a Method List, click the
Add button.
Both actions will result in the same window to configure:
To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
Figure 10- 39. Enable Method List Settings window
Figure 10- 40. Enable Method List - Edit window
Figure 10- 41. Enable Method List - Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be authenticated
•
using the local enable password database on the Switch. The user in the next
under the Delete heading corresponding to the entry desired to
169