Attaching Accessories; Telescope Is Now Fully Assembled - Meade LT ACF Series Instruction Manual

Attaching Accessories

Be sure the telescope master power switch is in
the off position. Remove the LT Series handbox and
the coiled interface cable from the packing materials.
Plug one end into the HBX port of the control panel
and plug the other end into the Handbox port on the
LT Series handbox.
Rear Cell Thread
Dust Cap
Remove the dust cap from the rear cell of the
telescope. Thread the 1.25" eyepiece holder onto
the rear cell thread. Slide the diagonal prism into
the eyepiece holder and lock in place by turning the
thumbscrew to a fi rm feel. Place the Super Plössl
26mm eyepiece into the diagonal prism and tighten the
diagonal prism thumbscrew to a fi rm feel only.
Eyepiece Holder
Diagonal Prism
INDEX
Your Telescope is now Fully Assembled
Now remove the dust cover from the front
of the telescope tube. Be careful not to touch the
glass lens.
Flip the Power Switch on the computer control
panel to the ON position. The copyright message lights
on AutoStar's LCD display.
Slew Speeds:
Speed 9: Fast
Arrow
.
. Keys
.
Speed 5: Medium
.
.
.
Speed 1: Slow
Number
Keys
"Press 0 to align or Mode for Menu" displays. You
can use the Arrow keys to slew (move) the telescope
up, down, right, or left. To change the telescope's slew
speed, press a Number key. "9" is the fastest speed
and "1" is the slowest speed. See page 20 for more
details. Or you can Press "0" to begin Easy Alignment.
See page 11 for more information.
7
7