Table of Contents
Advertisement
HOW TO OPERATE YOUR DIS~ASHER
Systems Monitor
This panel tells you what is happening in the dishwasher
and can alert you to some possible problems.
Information displayed:
Selected wash cycle
Selected dry option
Minutes to end of cycle
Cycle phase, such as WASHING, RINSING
or DRYING
Diagnostic codes to alert you to possible problems
the cycle you need that uses the least energy.
See Systems Monitor section for explanation of
displays and codes.
Load your dishwasher. (See Loading section.)
Use rinse aid agent to help prevent spotting. (See
How to Use a Rinse Agent section.)
Touch the center of the pad.
POTSCRUBBER —For items such as pots,
pans and casseroles with dried-on or baked-on
soils. Everyday dishes may be included. This
cycle will get heavily soiled dishes cleaner than the
normal cycle. It will not remove burned-on foods.
dishes, glasses and cookware with medium soils.
Designed to yield high performance on normal soils.
SHORT WASH —For loads of everyday dishes
with medium soils that have not dried on, such
as loads consisting mostly of glasses. Delay Start
CHINA CRYSTAL —For lightly soiled china and
crystal. The wash action is softened by pumping air
along with the water to protect your delicate items.
RINSE & HOLD —For rinsing partial loads
which will be washed later. Do not u.re detergent.
To change a setting, just touch the desired pad.
Your dishwasher is now automatically programmed
including a Soil Option Selection. Cycle Indicator
Lights tell you the complete program and a number
in the SYSTEMS MONITOR will tell you how long
the cycle will take. If you're satisfied, just touch the
START pad.
4
CYCLE
PHASE
—
–
ENERGY MONITOR
—
TIME
TO
END
OF CYCLE
Step 5.
Select a soil option
If you wish to make program changes, start with
the soil level. You should select a change within 30
seconds, otherwise all panel lights will go out. To
relight, touch any pad or open and reclose door.
HEAVY SOIL should be selected when dishes are
extra soiled or extra greasy. This lengthens cycle.
NORMAL SOIL is automatically programmed when
a cycle is selected. You may want to change the
selection depending on the soil on your dishes.
LIGHT SOIL will save time and money. This
shortens all cycles except RINSE & HOLD.
I
SYSTEMS MONITOR
Advertisement
Table of Contents
