Telephone Settings; Call Settings; Restore Original Settings - Nokia E71 User Manual

Device and SIM card security
To change the PIN code, select
code. The new code must be 4 to 8 digits long. The PIN code
protects your SIM card against unauthorized use and is
provided with the SIM card. After three consecutive incorrect
PIN code entries, the code is blocked and you need to use the
PUK code to unblock it before you can use the SIM card again.
To set the keypad to lock automatically after a defined period,
select Phone and SIM card
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is entered,
select Phone and SIM card
a number for the time-out in minutes or select
off the autolock period. When the device is locked, you can
still answer incoming calls, and calls may still be possible to
the official emergency number programed into your device.
To set a new lock code, select
code. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used, and
both uppercase and lowercase alphabets are possible. The
device notifies you if the lock code is not properly formatted.

Restore original settings

To restore the original device settings, select
settings. To do this, you need your device lock code. After
resetting, the device may take a longer time to power on.
Documents, contact information, calendar entries, and files
are unaffected.
© 2010 Nokia. All rights reserved.
Phone and SIM card
Keypad autolock period.
>
Phone autolock period. Enter
>
None
Phone and SIM card
Factory

Telephone settings

PIN
>
Select Menu
Select from the following:
Call — Define general call settings.
•
Call forwarding
•
See "Call forward," p. 38.
Call restriction
•
See "Call restrictions," p. 39.
Network
•
to set

Call settings

Lock
>
To display your phone number to the person you are calling,
select Call
>
determine whether your caller ID is sent, select
network.
To display your net call address to the person you are calling
using a net call, select
Yes.
To be notified of a new incoming call while you have a call in
progress, select
Activate. To check if the function is active on the network,
select Options
Tools Settings > Phone.
> >
— Define your call forwarding settings.
— Define your call restricting settings.
— Adjust the network settings.
Send my caller ID > Yes. To let the network
Call Send my internet call ID
>
Call Call waiting
>
Check status.
>
Set by
>
Options
> >
123