Limit Search - Radio Shack PRO-2050 Owner's Manual

To select another service bank, re-
peatedly press
SVC
displays the name of the bank you
want to use.
Notes:
• To skip data signals (such as
modem signals), press
"Skipping Data
Page 23.
• Because frequencies
always assigned to the same ser-
vices everywhere, you might hear
transmissions from one service in
another service group.
Press to start searching im-
SEARCH
mediately or to continue searching if
you want to skip a frequency.
During service-search, you can press
to pause the searching.
HOLD
appears. Press s or t to move up or
down one step, or press
resume searching.
Follow these steps to store frequen-
cies into channels.
1. Press
MANUAL
2. Use the number keys to enter the
channel number (1–300) where
you want to store the frequency,
then press
MANUAL
3. Press then
SVC
service bank and begin searching.
4. When the scanner stops on a
transmission, press
frequency appears.
5. Press to store the frequency into
E
the channel.
until the scanner
. See
DATA
Signals" on
are not
HOLD
SEARCH
.
.
to select a
SEARCH
. The
HOLD

LIMIT SEARCH

If you do not know a frequency to
store, you can search for transmis-
sions within a range of frequencies
you select, called the limit search
range . Then you can store any inter-
esting frequencies you find into chan-
nels.
1. Press
nel number where you want to
store a frequency, then press
MANUAL
ber appears.
2. Use the number keys and
enter the frequency that is the
lower limit of the range you want
to search.
3. Press
to
4. Use the number keys and
enter the frequency that is the
upper limit of the range you want
to search.
5. Press
The scanner begins to search
from the lower limit to the upper
limit.
6. When the scanner stops on a
transmission, quickly press either:
•
E
, enter the chan-
MANUAL
again. The channel num-
LIMIT.
, then press
LIMIT
to store the displayed fre-
• to
•
to
.
SEARCH
19