With Raid Functions - Supermicro X7SBi User Manual

X7SBi User's Manual
C-2 Installing the Windows XP/2000/2003 for systems

with RAID Functions

Installing a New Windows XP/2000/2003 Operating System
a. Insert the Microsoft Windows XP/2000/2003 Setup CD in the CD Driver, and
the system will start booting up from CD.
b. Press the <F6> key when the message-" Press F6 if you need to install a third
party SCSI or RAID driver" displays.
c. When the Windows XP/2000/2003 Setup screen appears, press "S" to specify
additional device(s).
d. Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH9R" into
Drive A: and press the <Enter> key.
e. Insert the driver diskette-"ITE RAID XP/2000/2003 Driver for IDE" into Drive
A: and press the <Enter> key.
f. Choose the Intel(R)82801GR/GH SATA RAID Controller from the list indicated
in the XP/2000/2003 Setup Screen, and press the <Enter> key.
g. Press the <Enter> key to continue the installation process. (If you need to
specify any additional devices to be installed, do it at this time.) Once all devices
are specifi ed, press the <Enter> key to continue with the installation.
h. From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The
XP/2000/2003 Setup will automatically load all device fi les and then, continue the
Windows XP/2000/2003 installation.
i. After the Windows XP/2000/2003 Installation is completed, the system will
automatically reboot.
j. Insert Supermicro's CD that came with the package into the CD Drive during
system reboot, and the following screen will appear.
Note: the current version of the ICH9R SATA RAID Utility can only support the
Windows XP/2000/2003 Operating System.
C-10