Before You Begin; Estimated Assembly/Set-Up Time - Razor iMod Owner's Manual

BEFORE YOU BEGIN

Remove contents from box. Remove the foam separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the iMod was 95 percent assembled and packed at the factory, there should not be any problems,
even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 15 minutes for assembly, not including initial charge time.
Allow up to 18 hours for initial charge (see page 3 for charging information).
Speed Control
Front Fork
Storage Compartment
Under Seat
Required Tools
Some tools may be supplied; however, we recommend the use of mechanic's grade tools. Use the supplied tools only
as a last resort.
2.5mm, 3mm, 5mm, 6mm
hexagonal key wrench
(included)
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Brake Lever
On/Off
Switch
Brake Lever
Adjuster
Chain Guard
14mm & 15mm wrenches
(included)
Charger
Charger
Plug
Charger
Port
Kick Stand
spoke wrenches Bicycle-style tire pump
(included) for Schrader valve tires,
with pressure gauge
(not included)
2
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
RAZOR iMOD.
The iMod has been built to certain
Razor design specifications. The
original equipment supplied at the
time of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
Charger
Port