Gaggia TITANIUM Operating Instructions Manual page 38

ENGLISH
then press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to set the minutes and memorise the setting
by pressing "MENU/OK".
set, the clock must be activated in order for the function to work.
• Press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the function:
enable it by pressing "MENU/OK".
• The display will show:
In this case pressing "MENU/OK" will deactivate the function.
Choose to activate the function by pressing "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " and when
appears, memorise the setting by pressing "MENU/OK".
When you exit the programming mode, the machine will check the set
parameters. If the current time falls within the set deactivation time,
the display will indicate:
"MENU/OK".
Later, to deactivate the machine again, go into the programming
mode by pressing "MENU/OK" and exit immediately by pressing
"ESC".
With this function, all the parts involved in the coffee dispensing
process undergo a washing cycle with water.
Downloaded from CoffeeMachineManual.com Manuals
ON/OFF TIME
OFF 9:30
Warning: if the on/off time settings coincide, the
machine will ignore both. After the times have been
Activating the automatic on/off function
Note: activating this function makes sense only if you
have already set the on/off times.
CLOCK
CLOCK
OFF
CLOCK
ON
ENERGY SAVING
Note: during the set deactivation period, the
machine can be restarted at any time by pressing
RINSING CYCLE
During the wash cycle it is recommended that a person
be on hand to supervise the operation. Before per-
forming the rinsing cycle fill the water tank.
• Select the function by pressing the key "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ ":
RINSING CYCLE
• Press the key "MENU/OK" to start the rinsing cycle, the display
shows:
RINSING CYCLE
The machine brews about half quantity of the water contained in the
tank from the dispenser.
Then the cycle stops automatically, and the display shows:
SELECT PRODUCT
READY FOR USE
FACTORY SETTINGS
This function allows you to restore all the machine operating parameters
originally set by the manufacturer.
• After accessing the programming mode, press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select
the function:
FACTORY SETTINGS
then enable it by pressing "MENU/OK". The following indication
will appear:
FACTORY SETTINGS
NO
• Choose whether you want to restore the factory settings by pressing
"∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " and press "MENU/OK" to confirm your selection.
Caution: when you restore all the factory settings, you
will lose any custom settings you have made on the
machine.
14 LEGAL INFORMATION
• This instruction book contains the information you need in order to
use and upkeep your appliance correctly.
• The information should be viewed as a guideline for using and
upkeeping your coffee maker in safety. The information is not
• 38 •