Gaggia TITANIUM Operating Instructions Manual page 36

ENGLISH
• After accessing the programming mode press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select
the function:
then enable it by pressing "MENU/OK".
The display will show, for example:
• Press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the desired temperature and memorise
it by pressing "MENU/OK".
In the pre-brewing process the coffee is slightly moistened before actual
brewing. This brings out the full aroma of the coffee, which thus acquires
a delicious flavour.
• Press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the function:
then enable it by pressing "MENU/OK".
The display will show:
• by pressing "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " you can choose to deactivate the function
or extend the pre-brewing phase
to enhance the flavour of your coffee.
• Memorise the choice by pressing "MENU/OK".
With the pre-grinding process the appliance grinds twice: the first
time for the type of coffee selected and the second time for the
next coffee (not yet selected).
entertaining guests or during a party).
Downloaded from CoffeeMachineManual.com Manuals
TEMPERATURE
TEMPERATURE
MEDIUM
PRE-BREWING
PREBREWING
PREBREWING
ON
PREBREWING
OFF
PREBREWING
LONG
PRE-GRINDING
This function is useful only if you have to make
several coffees at the same time (e.g. when
• After accessing the programming mode, press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select
the function:
PREGRINDING
enable it by pressing "MENU/OK".
• The display will show:
PREGRINDING
OFF
Press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the desired setting and memorise it by
pressing "MENU/OK".
TOTAL COFFEES
This function allows you to display how many coffees the appliance has
made to date.
• After accessing the programming mode, press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select
the function:
TOTAL COFFEES
enable it by pressing "MENU/OK". The display will show, for
example:
TOTAL COFFEES
TIMER
This coffee maker features a new function that allows you to save energy
in case of long periods of quiescence. This function, which is factory set,
automatically switches the machine from the
SELECT PRODUCT
READY FOR USE
status to the
ENERGY SAVING
mode after 3 hours have elapsed since the previous use.
• The switch-off time can be set at 15-minute intervals, down to a
minimum of 15 minutes. The function may not be disabled.
• In the programming mode press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the
TIMER
• 36 •
86