Advertisement

programmable control
model 99107
installation and setup guide
M3561-01 • 01/26/15 • ©2014 Hunter Fan Company

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SimpleConnect 99107 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hunter SimpleConnect 99107

  • Page 1 99107 installation and setup guide M3561-01 • 01/26/15 • ©2014 Hunter Fan Company...
  • Page 2: Installation

    If uncertain how to do this, reference the fan’s owner’s manual. Hunter fan manuals can be found on www.HunterFan.com. Note: With wiring exposed, it may be helpful to note existing wire connections or to take a digital photo for reference before removing the wire connectors.
  • Page 3 1/2 inch. Place remaining excess wire into the ceiling electrical box. The bracket and fan must remain properly grounded. If the fan is installed on an angled ceiling and you need assistance with installation, please call 1-888-830-1326. M3561-01 • 01/26/15 • ©2014 Hunter Fan Company...
  • Page 4 Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. M3561-01 • 01/26/15 • ©2014 Hunter Fan Company...
  • Page 5 After all wires are connected and secured with wire connectors, reinstall the canopy. If uncertain how to install the canopy, reference the fan’s owner’s manual. Restore power at the circuit breaker. M3561-01 • 01/26/15 • ©2014 Hunter Fan Company...
  • Page 6 Dimming: In the app, navigate to the “Rooms Configured” settings screen and tap the Gear icon next to your room. Here you can turn the dimming feature on or off. This may cause faulty operation if your bulbs do not support dimming. M3561-01 • 01/26/15 • ©2014 Hunter Fan Company...
  • Page 7 You have successfully set up your additional receiver. Tap the Back button twice to begin using the app to take control of your fan! You can now reconnect power to your other fans. M3561-01 • 01/26/15 • ©2014 Hunter Fan Company...
  • Page 8: Maintenance

    Light Operation Control Press and quickly release the Light button on the remote control to turn the light off or on. Light Control M3561-01 • 01/26/15 • ©2014 Hunter Fan Company...
  • Page 9: Troubleshooting

    Light button for at least four seconds. Note: The lights will flash (if applicable) and the fan will turn on at low speed. This is visual confirmation that the pairing was successful. M3561-01 • 01/26/15 • ©2014 Hunter Fan Company...
  • Page 10 Control while in your possession, or unreasonable use. This warranty does not apply to batteries or to deterioration or damage to the product caused by the use of faulty batteries. IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. SOME STATES DO NOT ALLOW...

Table of Contents