Replacing The Car Charger Fuse - Targa CR 1.0 A1 User Manual And Safety Information

4. Next drag this video file into the "Movies" category of iTunes.
Now the video file is available in the Library under "Home Videos" and can be synchronised
from here with an iOS device.

Replacing the car charger fuse

When the 12/24 V car charger is connected but the LED indicator of the 12/24 V car charger
(28) does not light up, the fuse might be defective.
WARNING! If you need to replace the fuse make sure to use a fuse of the same type
(T2A L, 250 V).
To replace the fuse, proceed as follows:
1. Rotate the screw cap (d) counter-clockwise and remove it
from the cigarette lighter plug housing (a). If necessary, use
pliers.
2. Replace the fuse (b) with a new T2A L, 250 V type fuse.
You can purchase a suitable fuse from any electronics retail
outlet.
3. First insert the fuse (b) into the cigarette lighter plug housing (a).
4. Insert the metal contact (c) into the screw cap (d).
5. Next, insert the screw cap (d) with the inserted metal contact (c) over the fuse (b) and then
screw the cap (d) clockwise onto the cigarette lighter plug housing (a).
CR 1.0 A1
English - 41