Table of Contents
Advertisement
Initial Camera Setup
-
Remove any attached camera lanyard.
-
Insert a fully charged battery. Due to the power required to operate the
camera and LCD screen, start each dive with a fully charged camera
battery.
-
Insert and format a memory card.
-
Set camera to "Auto mode
-
Set Image Mode to "16m."
-
Set White Balance to "Auto."
-
Set Metering to "Center-weighted."
-
Set ISO sensitivity to "125."
-
Set AF area mode to "Center."
-
Set Autofocus mode to AF-S "Single AF."
-
Set camera Time Zone and Date.
-
Set Vibration reduction to "On."
-
Set AF-assist beam to "Off."
-
Set Flash Mode to "Fill flash ."
-
Set Auto off to "5 min."
-
Set Macro mode
the image is overexposed, use "-" exposure compensation
and/or back away, zoom in, and then reshoot.
4
(before placing camera in housing)
."
to "On" when shooting close-up. If
Advertisement
Table of Contents
