Appendix B - Midi Setup Options; Midi In Controller - Kurzweil PC3 User Manual

13. Appendix B - MIDI Setup Options

The MIDI Setup menu provides tabs for configuring the MIDI Port Connections. MIDI In
Controller and Virtual MIDI Ports (the Virtual MIDI tab only appears in the Macintosh version of
SoundEditor). MIDI Port Configurations are covered in the MIDI Setup section page 9. This
Appendix provides details on configuring and using the MIDI IN Controller and Virtual MIDI
Port functions.

MIDI In Controller

Only a few simple steps are required to configure the MIDI In Controller function:
1. Select the MIDI port that the controller is connected to.
2. Make sure that the „Activate MIDI Controller Port‟ checkbox is checked.
3. Set the MIDI Controller to the same MIDI channel as the PC3.
4. Test the setup. If the controller can send MIDI Note On messages, you can test the setup by
playing a few notes. Otherwise, try sending an easily discernible MIDI message, such a
Program Change command.
94