Program Name Display; Selecting Program Categories - Kurzweil PC3 User Manual

Program Name Display

The Program Name Display shows the name of the currently selected Program (in the
example here, „Standard Grand‟), the location of the Program (bank Base 1, location 001), and
the category of the Program („Piano‟):
The Program name can be changed by clicking inside the display and typing a new name up to
16 characters in length. Clicking on the OK button will write the new name to SoundEditor and
to the PC3:
When you change the Program name, the new name is automatically written to the
PC3.

Selecting Program Categories

There are two ways to assign a category to a Program. This can be done from the Program
Name Display, or from the Program Bank list.
To assign a category from the Program Name Display, click in the Category section of the
display (the lower left of the Display window). This will produce a contextual menu of
categories to select from:
You can also select a category from the Program Bank list by right-clicking in the Category
field. This will produce the same contextual menu as shown above. Either method will
immediately update the PC3 with the new Category assignments.
21