Dmx Mode; Addressing; Dmx Protocol - PROEL PLLEDRB8 User Manual

DMX MODE

It is possible to control the device by a DMX controller.

ADDRESSING

To set the address of the projector, push SETUP button until the
display shows:
Now it is possible to assign the wanted channel to the projector by
pushing UP or DOWN buttons.

DMX PROTOCOL

The PLLEDRB8 blinder allows you to set 5 or 8, 14 or 26 DMX
channels for different applications.
Push SETUP button until display is as follows:
Set the desired channel's value (5 or 8 or 14 or 26) by pressing the UP
or DOWN buttons.
Choosing 26 as value, the first channel is occupied from DIMMER, the
second one ad just the STROBE effect and each spotlight occupies 3
channels so that the whole channels occupied from the projector are
26.
DMX MODE
Dmx address:
DMX MODE
Channel num: 26
16