PROEL PLLEDRB8 User Manual page 17

Choosing 14 as value, the first channel is occupied from DIMMER, the
second one ad just the STROBE effect and each spotlight occupies 3
channels so that the whole channels occupied from the projector are
14.
Setting the projector on 8 channels value, the DIMMER occupies the
first channel, the FLASH occupies the second channel and a couple of
spotlight occupies 3 channels so that the whole channels that control
the projector are 8.
CH. EFFECT
1 DIMMER
2 STROBE
3-5 SPOT 1
6-8 SPOT 2
9-11 SPOT 3
12-14 SPOT 4
15-17 SPOT 5
18-20 SPOT 6
21-23 SPOT 7
24-26 SPOT 8
CH. EFFECT
1 DIMMER
2 STROBE
3-5 SPOT 1 & 2
6-8 SPOT 3 & 4
9-11 SPOT 5 & 6
12-14 SPOT 7 & 8
17