Auto Run Mode; Dmx Mode - PROEL PLLEDRB4 User Manual

AUTO RUN MODE

Selecting this mode, the projector runs all 14 programs in a continuous
loop and it is possible to set up the frequency by pressing UP and
DOWN buttons.

DMX MODE

It is possible to control the device by a DMX controller.
ADDRESSING
To set the address of the projector, push SETUP button until the display
shows:
DMX MODE
Dmx address:
Now it is possible to assign the wanted channel to the projector by
pushing UP or DOWN buttons.
DMX PROTOCOL
The PLLEDRB4 blinder allows you to set 5 or 8 or 14 DMX channels for
different applications.
Push SETUP button until display is as follows:
DMX MODE
Channel num: 14
Set the desired channel's value (5 or 8 or 14) by pressing the UP or
DOWN buttons.
Choosing 14 as value, the first channel is occupied from DIMMER, the
16